PLC 36-DC input / 24-rơle output. AC100-240
- Nguồn cấp: 100-240VAC
- Ngõ vào/ra: 36-DC input / 24-Relay output
- Bộ nhớ chương trình: 10Ksteps (EEPROM)
- Vùng nhớ dữ liệu DM: 32Kwords
- Số lượng timers / counters: 4096 timers; 4096 counters
- Tốc độ xử lý: Lệnh cơ bản (LD): 0.55 µs min.; Lệnh cao cấp (Mov): 4.10 µs min.
- Ngõ vào tốc độ cao: 4 counters, 2 axes (24-VDC input) 4 inputs: Differential phases (4x), 50 kHzSingle-phase (pulse plus direction, up/down, increment); 100kHzValue range: 32 bits; Linear mode or ring modeInterrupts: Target value comparison or range comparison
- Ngõ vào interrupt: 2 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters
- Ngõ vào tác động nhanh: 6 points (Min. input pulse width: 50 μs max.)
- Ngõ ra xung (transistor output): Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed); 2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction)
- Ngõ ra xung điều chế (PWM): Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%)
- Trang bị sẵn cổng USB 2.0 kết nối máy tính
- Có thể mở rộng thêm cổng truyền thông RS232C hoặc RS422/RS485
- Giao thức truyền thông: Host Link; 1:N NT Link; No-protocol mode; Serial PLC Link Slave, Serial PLC Link Master; Modbus-RTU Easy Master
- Trang bị đồng hồ thực (clock)
- Tiêu chuẩn: EC, EMC (zone B), JIS
Liên kết



CÓ THỂ BẠN QUAN TÂM
Bộ điều khiển máy cắt đá DH12S-2W-8K
Sửa biến tần tại TPHCM
Sửa biến tần tại Hà Nội
Ứng Dụng Của Biến Tần Trong Tải Nặng
Biến tần cho máy cán tôn
Biến Tần Cho Máy Cắt Giấy
SẢN PHẨM NỔI BẬT
Khởi động mềm Coreken TSSM-4T-045 3P 380V 45kw
Khởi động mềm Coreken TSSM-4T-037 3P 380V 37kw
Khởi động mềm Coreken TSSM-4T-030 3P 380V 30kw
Khởi động mềm Coreken TSSM-4T-022 3P 380V 22kw
Khởi động mềm Coreken TSSM-4T-018.5 3P 380V 18.5kw
Khởi động mềm Coreken TSSM-4T-015 3P 380V 15kw
Biến tần 630kw H330-4T630G/710P 3P 380V- Biến tần Coreken
Biến tần 560kw H330-4T560G/630P 3P 380V- Biến tần Coreken