PLC 6-DC input / 4-rơle output. AC100-240
- Nguồn cấp: 100-240VAC
- Ngõ vào/ra: 6-DC input / 4-Relay output
- Bộ nhớ chương trình: 5Ksteps (EEPROM)
- Vùng nhớ dữ liệu DM: 32Kwords
- Số lượng timers / counters: 4096 timers; 4096 counters
- Tốc độ xử lý: Lệnh cơ bản (LD): 0.55 µs min.; Lệnh cao cấp (Mov): 4.10 µs min.
- Ngõ vào tốc độ cao: 4 counters, 2 axes (24-VDC input) 4 inputs: Differential phases (4x), 50 kHzSingle-phase (pulse plus direction, up/down, increment); 100kHzValue range: 32 bits; Linear mode or ring modeInterrupts: Target value comparison or range comparison
- Ngõ vào interrupt: 2 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters
- Ngõ vào tác động nhanh: 2 points (Min. input pulse width: 50 μs max.)
- Ngõ ra xung (transistor output): Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed); 2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction)
- Ngõ ra xung điều chế (PWM): Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%)
- Trang bị sẵn cổng USB 2.0 kết nối máy tính
- Có thể mở rộng thêm cổng truyền thông RS232C hoặc RS422/RS485
- Giao thức truyền thông: Host Link; 1:N NT Link; No-protocol mode; Serial PLC Link Slave, Serial PLC Link Master; Modbus-RTU Easy Master
- Trang bị đồng hồ thực (clock)
- Tiêu chuẩn: EC, EMC (zone B), JIS
Liên kết
CÓ THỂ BẠN QUAN TÂM
Biến tần Hà Nội
Biến tần Hưng Yên
Biến tần Hải Dương
Biến tần Bắc Giang
Biến tần Hải Phòng
Biến tần Quảng Ninh
SẢN PHẨM NỔI BẬT
Máy cắt Mitsubishi(ACB)
Rơ le nhiệt Mitsubishi
Contactor Mitsubshi – Khởi động từ Mitsubishi
Aptomat Mitsubishi
CHV100 – BIẾN TẦN INVT ĐIỀU KHIỂN VECTO VÒNG KÍN
CHV180- BIẾN TẦN INVT CHUYÊN DÙNG CHO THANG MÁY
CHV110 – TỦ BIẾN TẦN INVT CHUYÊN CHO MÁY ÉP NHỰA
CHV160A- BIẾN TẦN INVT CHUYÊN CHO CUNG CẤP NƯỚC