PLC 12-DC input / 8-PNP output, cổng Ethernet. 24VDC
- Nguồn cấp: 24VDC
- Ngõ vào/ra digital: 12-DC input / 8-Transistor PNP
- Ngõ vào analog: 2 ngõ vào 0~10VDC (độ phân giải: 1/1000); không cách ly
- Bộ nhớ chương trình: 5Ksteps (EEPROM)
- Vùng nhớ dữ liệu DM: 10Kwords
- Số lượng timers / counters: 4096 timers; 4096 counters
- Tốc độ xử lý: Lệnh cơ bản (LD): 0.55 µs min.; Lệnh cao cấp (Mov): 4.10 µs min.
- Ngõ vào tốc độ cao: 4 inputs/2 axes (24 VDC)Differential phases (4x), 50 kHz Single-phase (pulse plus direction, up/down, increment), 100 kHzValue range: 32 bits, Linear mode or ring modeInterrupts: Target value comparison or range comparison
- Ngõ vào interrupt: 6 inputs (Response time: 0.3 ms)
- Ngõ vào interrupt counter mode: 6 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters
- Ngõ vào tác động nhanh: 6 points (Min. input pulse width: 50 μs max.
- Ngõ ra phát xung (transistor output): Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed)2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction)
- Ngõ ra xung điều chế (PWM): Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%)2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz (Accuracy: +1%/0% at 0.1 Hz to 10,000 Hz and +5%/0% at 10,000 Hz to 32,800 Hz)
- Trang bị sẵn cổng ETHERNET kết nối máy tính và màn hình HMI (Connecting Support Software, Message Communications, Socket Service)
- Có thể mở rộng thêm 01 cổng truyền thông RS232C hoặc RS422/RS485
- Giao thức truyền thông: Host Link, 1:N NT Link, 1:1 NT Link, Noprotocol, Serial PLC Link Slave, Serial PLC Link Master, Serial Gateway converted to CompoWay/F, Tool Bus, 1:1 Link Master, and 1:1 Link Slave
- Trang bị đồng hồ thực (clock)
- Tiêu chuẩn: CE
Liên kết
CÓ THỂ BẠN QUAN TÂM
Biến tần Hà Nội
Biến tần Hưng Yên
Biến tần Hải Dương
Biến tần Bắc Giang
Biến tần Hải Phòng
Biến tần Quảng Ninh
SẢN PHẨM NỔI BẬT
Máy cắt Mitsubishi(ACB)
Rơ le nhiệt Mitsubishi
Contactor Mitsubshi – Khởi động từ Mitsubishi
Aptomat Mitsubishi
CHV100 – BIẾN TẦN INVT ĐIỀU KHIỂN VECTO VÒNG KÍN
CHV180- BIẾN TẦN INVT CHUYÊN DÙNG CHO THANG MÁY
CHV110 – TỦ BIẾN TẦN INVT CHUYÊN CHO MÁY ÉP NHỰA
CHV160A- BIẾN TẦN INVT CHUYÊN CHO CUNG CẤP NƯỚC