Biến tần H100-S1.5G vào 1P 220V ra 3P 220V 1.5kw
Tính năng sản phẩm Biến tần H100-S1.5G
Thiết kế tinh tế hoàn toàn mới, tiết kiệm tới 40% không gian.
Hỗ trợ nhiều loại cài đặt, cũng hỗ trợ lắp đặt ray dẫn hướng liền mạch.
Cổng giao tiếp tiêu chuẩn, hỗ trợ giao thức giao tiếp Modbus.
Bảng kỹ thuật biến tần H100-S1.5G
Item | Specification | |
Basic function | Maximum frequency | 600Hz |
Carrier frequency | 0.5kHz~16kHz;The carrier frequency is automatically adjusted based on the load features. | |
Input frequency resolution | Digital setting: 0.01Hz
Analog setting: maximum frequency ×0.5% |
|
Control mode | Voltage/Frequency(V/F) control | |
Overload capacity | Model G machine: 60s for 150% of the rated current, 1s for 180% of the rated current | |
Torque boost | Customized boost 0.1%-30.0% | |
V/F curve | Three methods: straight-line V/F curve; Multi-point V/F curve; N-power V/F curve (1.6 power, 2 power) | |
Acceleration and deceleration curve | Straight line or S-curve acceleration and deceleration mode; Four groups of acceleration/deceleration; time with the range of 0.0-6500.0s | |
DC braking | DC braking frequency: 0.00 Hz to maximum frequency
Braking time: 0.0-36.0s Braking action current value: 0.0%-100.0% |
|
JOG control | Braking current: 0.0%~100.0%
JOG frequency range:0.00-50.00Hz JOG acceleration/deceleration time: 0.0-6500.0s |
|
Simple PLC, multi-wire segment | Up to 16 speeds can be achieved via the onboard PLC or control terminals | |
Onboard PID | It realize process-controlled closed loop control system easily | |
Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes | |
Overvoltage/Overcurrent stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/overcurrent. | |
Operation and Protection | Running command source | Operation panel
Control terminals Serial communication port You can perform switchover between these sources in various ways. |
Frequency source | There are a total of 8 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. | |
Input terminal | 4 digital input(DI) terminals
1 analog input(AI) terminals, which supports 0-10v voltage input or 4-20 mA current input |
|
Output terminal | 1 relay output terminal | |
Protection mode | Motor short-circuit detection at power-on, output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection and overload protection. | |
Options | Optional RS485 external keypad, through the RJ-11 communication terminal |
Bảng lựa chọn sản phẩm
Model |
Power Capacity
kVA |
Input Current
A |
Output Current
A |
Adaptable Motor Kw Hp |
|
Single-phase: 220V, 50/60Hz | |||||
H100S0.75G | 1.5 | 8.2 | 4.0 | 0.75 | 1 |
H100S1.5G | 3.0 | 14.0 | 7.0 | 1.5 | 2 |
Đánh giá
Chưa có đánh giá nào.